Saturday, November 28, 2009

Body Buck Completed – 10 Hours


Finished off the Body Buck today, irrelevant of what any manual or on-line thread states it takes a good 10 hours to do by yourself.

Many thanks to Greg who helped me with “measure twice cut once” by measuring his own car height sitting on 12” jack stands at 42”, this buck clears 48”. It’s always good to learn from others.

Car should arrive in about 2 ½ weeks, ex-factory 12/12/09, just in time for Christmas.

Could not resist Factory Five Racing’s black Friday sale, purchased floor mats and sun visors both at half price.

Wednesday, November 25, 2009

First Parts Arrive

Today the first upgraded parts arrived. After reviewing a number of threads on the FFCobra forum, reviewing the manual and attending the build school, I had decided to purchase the LCA bushings and offset steering rack bushings from Breeze Automotive.

The 4130 steel bushings solve the binding problem with FFR Tubular Front Lower Control Arms. The longer length prevents the frame tabs from pinching the poly bushings, and the reduced diameter permits grease to migrate between the bushing OD and the poly bushing ID. The ends are knurled so they can be firmly gripped by the frame tabs.

Solid offset bushings to lower and center the rack in the Mk3.1 Factory Five Roadster chassis. The offset is .35" which will lower the rack 1/4" and offset it 1/4" to the passenger side from the factory designed mounting points. This location centers rack travel in the chassis and further reduces bump steer. The one piece bushings insert from rear to clamp rack to the rear face of the front mounting ear. This makes the rack an integral frame member and adds to the stiffness of the front of the frame. The position is about 1/4" further forward than when installing the rack with two piece poly bushings. Material is as-machined 6061 aluminum.

Checked with the guys at Factory Five today and Stewart Transport everything is still on track to leave the factory 12/12/09.

Sunday, November 15, 2009

Unexpected surprise

Got an unexpected surprise today, Jerry (AKA Airspeed1 on the FFCobra forum) call this afternoon and invited me over to see his car.

Jerry and his brother both built their cars together, (Blue car in the foreground is Jerry’s) and offered a wealth of information ranging from the fun of getting the car titled, to local body shops for paint and finishing.

The real thrill was Jerry took me out for a drive and I haven’t stopped smiling since!

Many thanks Jerry, the excitement grows as I wait for my kit to arrive.

Saturday, November 14, 2009

Body Buck Thoughts

After looking at the on-lines plans for the body buck (http://www.ffcobra.com/FAQ/bodybuck02.html) I decided to implement a quick re-design after measuring the highest point on the frame at Build School when the car was mounted on 13” jack stands. For others following this thread, I have decided to build a clearance of 48” under the front and rear body supports.

In addition because of the number of boxes I am expecting when the kit arrives, I also included a full shelf to my design.

The following material was all purchased from Lowes:
4 sheets of 7/16” x 4’ x 8’ OSB Sheet
10 length of 2” x 4” x 8’ studding
1Lb Box of 1 5/8” Course Drywall Screws
1Lb Box of 2 1/2” Course Drywall Screws
3/4" x 6’ x 3/8” Foam Pipe Insulation
Titebond Original Wood Glue 8oz

The 4 x 5” Castor wheels were purchased from Harbor Freight. My plan is still to complete the body buck over Thanks Giving.

Monday, November 9, 2009

Build School Summary

I like many others were skeptical about the benefit of this course, as an engineer and someone who had read the manual, been active on FFForum for many months I felt confident in building my car, WRONG!






This is the most valuable experience anyone can get who intendeds to build a FFR roadster, whether from a donor or full kit package. Don’t cut corners, go to build school, this will save you time, money and your sanity further into your build, plus you get to meet a great bunch of like minded people, many of whom I am sure will become lifelong friends.

Day 3 of Build School

Three days, 15 guys, 2 great instructors, and a Factory Five Roadster, the experience was priceless.

Day 3 started with a discussion on finishing the body and paint, followed by the installation of the lights and other body fittings. Next we assembled and installed the dash, parking brake, remaining sheet metal, seatbelts, and bulb seal. The body was then mounted back on the frame as we began the home stretch of this build.

Starting with the windshield, this and the doors were installed together with a discussion on mounting the hood. Although this was the end of our build the remaining inner wheel well sheet metal parts were offer up as was the shark gills for discussion on fitting.

With the wheels popped back on, steering wheel and gear lever fitted she was ready to be let loose. Jim, our instructor, as you can see from the video had more faith in our workmanship then we had.

Saturday, November 7, 2009

She Runs! Day 2 objective completed

Another day of great progress, all break lines installed and the brakes bled, more sheet metal, steering column installed, as was the engine and transmission. Radiator and coolant hoses added, more sheet metal, full electrical harness, battery box and you guessed it - more sheet metal. Engine fired successfully after a little fault finding. The really cool part of today was three local roadster owners tuned up for lunch.

Day 2 of Build School

After an enjoyable group dinner and a good night’s sleep Day 2 expectations are that the car will be at the go kart stage with running engine by the end of today.

(Picture is a 302 EFI with T5 Transmittion)

Friday, November 6, 2009

Great first day

Great first day at build school with a good group of guys and experienced instructors. This is a priceless insight into everything the manual does not tell you.

Today we completed front and rear suspension, rear axle, fuel tank, pedal box, F panels and passenger foot box.

We also went through shock settings, fuel filter location, brake reservoir positioning and finally front and rear suspension alignment. Not a bad achievement for one day.

Day 1 of Build School

I guess this is how everyone feels, its day one of build school and I have not been able to sleep for thinking about the adventure which is about to begin.