Friday, March 25, 2011

Texas Annual Cobra Club Meeting - San Marcos

›
Track day at Harris Hill, Joe at the wheel. Cruising the hill country tomorrow.
3 comments:
Saturday, January 8, 2011

Final Fitting, Drilling and Mounting Cockpit Panels – 16 Hours

›
Build sequence and construction of the car is very much personal choice, hence no two cars are ever the same. This theory very much applies ...
Saturday, January 1, 2011

Cockpit Aluminum Panels – 8 Hours

›
This being the first posting of 2011, I would like to first take the opportunity to wish everyone following this blog a happy and prosperous...
2 comments:
Wednesday, December 29, 2010

Cockpit Sheet Metal and Filler Patches – 3 Hours

›
With the engine running and all fuel and break lines leak free it was back to fitting and installing the cockpit aluminum panels. The front ...
1 comment:

30 Minute Engine Run

›
Ran the engine up for 30 minutes, during this time another small fuel leak was found. The fuel regulator was also adjusted to 43psi. After f...
1 comment:
Wednesday, December 22, 2010

Day 365 of Build – First Engine Start

›
It has taken exactly 1 year to get to this point in the build. Step one was to check for fuel leaks, at 20psi of fuel pressure a small leak ...
2 comments:
Sunday, December 19, 2010

Vapor Canister & Odd’s and End’s – 4 hours

›
The charcoal vapor canister was mounted on the driver’s side fuel tank support post, although many people will make a homemade version, the ...
Saturday, December 18, 2010

Flexible Fuel Hose – 4 Hours

›
Installed 6AN flexible fuel hose from the hard lines, which terminate at the passenger side foot box, to the FAST EFI fuel rail, returning v...
Sunday, December 5, 2010

FAST EFI Computer – 2 Hours

›
The FAST EFI computer was mounted in the space between the firewall and the dashboard. Although the computer is weatherproof and can be moun...

Exhaust Hanger & Wiper Motor – 3 Hours

›
After a successful installation of the drives side exhaust it was found that the passenger side flared out by approximately 1” from the chas...