With the engine running and all fuel and break lines leak free it was back to fitting and installing the cockpit aluminum panels.
The front DS foot box panel was fitted around the brake lines (see picture). This will be painted with POR15 to match the black powder coating.
Next the DS cockpit floor was fitted and trimmed, as was the under door panel. There is a small patch (part number FFR12274) which all need installing to the DS floor, this patch cover an alternative routing of the transmission harness.
For this build the transmission harness will run inside of the transmission tunnel terminating at the access point in the DS foot box.
With the engine running and all fuel and break lines leak free it was back to fitting and installing the cockpit aluminum panels. 
The front DS foot box panel was fitted around the brake lines (see picture). This will be painted with POR15 to match the black powder coating.
Next the DS cockpit floor was fitted and trimmed, as was the under door panel. There is a small patch (part number FFR12274) which all need installing to the DS floor, this patch cover an alternative routing of the transmission harness. 
For this build the transmission harness will run inside of the transmission tunnel terminating at the access point in the DS foot box.
Thanks for your great article friend, i get new information, new ideas to do somethings, i hope you will share again, i keep waiting for next post, thanks. ring rolling forging
ReplyDelete