After fitting the firewall it still appeared flimsy for the application and so after researching the thoughts of others I decided to manufacture my own firewall support bracket from the redundant foot box vertical front wall (FFR 10904), the bottom of this panel already has a 90 degree bend.After installation is does improve the rigidity of the firewall especially in the area were the master brake fluid reservoirs will be mounted.
Fraiser, your firewall support bracket looks nice, good job!
ReplyDeleteI found that a full length support would make it hard to get wiring from one side to the other (would at least have to make holes. I opted for a support almost (need room for bulb seal) at the top of the firewall going back to the dash hoop.
ReplyDelete